Phone:
0086 28 87573647
+86 19150187139
The rated daily water production of this product refers to the RO membrane's capacity at 25°C. For every 1°C drop in water temperature, RO membrane output decreases by approximately 3%. When the water temperature falls below 5°C, the RO membrane will stop producing water. Users should consider the seasonal reduction in water temperature, especially in winter, when selecting and ordering the system.
Conductivity is the typical value during continuous operation.
In areas with poor feed water quality (TDS ≥ 200 ppm), it is recommended to install a water softener or upgrade the pre-treatment system.
| Model Number | UNPA-5/10T |
| Feed Water Requirements | TDS < 200 ppm, Water Pressure: 0.10 – 0.40 MPa, Water Temperature: 5 – 45°C |
| Production Capacity | 5/10 (L/h) |
| Maximum Output Flow Rate | 1.5 L/min (when water tank is full) |
| RO Water Quality | Conductivity ≤ 2% of feed water conductivity (real-time online monitoring) |
| Maximum Single Draw Volume | 1.5 L |
| Water Tank Configuration | Built-in reservoir, standard 1-gallon pressure water tank |
| Unit Dimensions | 320 (W) × 330 (D) × 560 (H) mm |
| Net Weight | Approx. 10 kg (excluding consumables) |
| Power Supply | AC220V~50HZ(Power consumption: 80 W) |
| Recommended Applications | Vessel rinsing, student experiments, equipment washing (e.g., humidity & temperature chambers, cleaning machines), autoclaves, and other laboratory instruments requiring high-purity water |
*Dimensions: W (front) × D (side) × H (height), with a tolerance of ±5 mm (0 to +5 mm).
Online conductivity monitoring of pure water quality, with digital LED LCD display.
Automatic water generation and storage: system automatically stops when the reservoir is full and restarts automatically when water level drops.
Touch-button interface for enhanced button durability.
Built-in automatic RO membrane flushing function to extend reverse osmosis membrane life.
Compact integrated pressure water tank design.
All tubing and fittings made of inert materials—polyethylene (PE) and polyoxymethylene (POM)—to prevent secondary water contamination.
Modular injection-molded consumables for quick and easy replacement—users can replace components themselves without requiring on-site technician service.
