Phone:
0086 28 87573647
+86 19150187139
The specified production capacity of this product refers to the rated output of the RO membrane at a water temperature of 25°C. For every 1°C decrease in temperature, the RO membrane's water production drops by approximately 3%. When the water temperature falls below 5°C, the RO membrane will cease producing water. Users should take into account the seasonal drop in water temperature, particularly during winter, when selecting and ordering the system.
Conductivity and resistivity are typical values measured during continuous water production.
In regions with poor feed water quality (TDS ≥ 200 ppm), it is recommended to add a water softener or enhance the pre-treatment system.
| Model Number | UNPB-5/10T |
| Feed Water Requirements | TDS < 200 ppm, Water Pressure: 0.10 – 0.40 MPa, Water Temperature: 5 – 45°C |
| Production Capacity | 5 / 10( L/h) |
| Maximum Output Flow Rate | 1.5 L/min (when water tank is full) |
| RO Water Quality | Conductivity ≤ 2% of feed water conductivity (real-time online monitoring) |
| UP Water Quality | Resistivity: 10.0 – 18.0 MΩ·cm (real-time online monitoring) |
| Maximum Single Draw Volume | 1.5 L |
| Water Tank Configuration | Built-in reservoir, standard 1-gallon pressure water tank |
| Unit Dimensions (W × D × H) | 320W × 330D × 560H(mm) (tolerance: 0 to +5 mm) |
| Net Weight | Approx. 11 kg (excluding consumables) |
| Power Supply | AC220V~50HZ (Power consumption: 80 W) |
| Recommended Applications | Preparation of reagents, formulations, and buffer solutions; student experiments and vessel rinsing; routine qualitative analysis (e.g., physical and chemical testing); also suitable for salt spray chambers, aging testers, atomic absorption spectrometers (AAS), atomic emission spectrometers (AES), electrochemical interface studies, and other precision analytical instruments requiring high-purity water |
*Dimensions: W (front) × D (side) × H (height), with a tolerance of ±5 mm (0 to +5 mm).
Real-time online monitoring of ultrapure water quality with digital conductivity display on an LED LCD panel.
Dual-function system: produces both RO purified water and UP ultrapure water. Features a constant-pressure water reservoir with a maximum dispensing flow rate of up to 1.5 L/min when full.
Fully automated water generation and storage: automatically stops when the tank is full, and reactivates automatically when water level drops.
Compact integrated pressure water tank design for space-saving installation.
All tubing and fittings made from inert materials—polyethylene (PE) and polyoxymethylene (POM)—to prevent secondary water contamination.
Modular, universal consumables for fast, easy replacement—users can replace components themselves without requiring on-site service or technician support.
