Sep 12, 2014
On the one hand, raw water is increasingly polluted; on the other hand, people have higher and higher requirements for drinking water quality. With the improvement of membrane separation technology, m...
Sep 12, 2014
Automatic Control Working ProcessThe regeneration of a fully automatic water softener can be initiated based on time or flow rate. The working process of a water softener generally consists of the fol...
Sep 12, 2014
Water softeners, commonly known as sodium ion exchangers, can only remove hardness components (Ca2+, Mg2+) from raw water, but not alkalinity components (HCO3-, etc.). Therefore, water treated by a so...
Sep 12, 2014
CSM reverse osmosis membranes are a type of aromatic polyamide composite membrane (TFC membrane) with a three-dimensional cross-linked surface active layer developed by Sehan Corporation. As we know, ...
Sep 12, 2014
Packed-bed electrodialysis, also known as electrodeionization (EDI), utilizes the polarization phenomenon during electrodialysis to electrochemically regenerate ion-exchange packed beds. It combines t...
Sep 12, 2014
High-purity water is crucial for many industrial and commercial projects, such as the semiconductor manufacturing and pharmaceutical industries. Previously, these industries used ion exchange to obtai...
Sep 12, 2014
1. Small footprint, eliminating the need for mixed bed and regeneration equipment;2. Continuous and stable water production with high-quality effluent, whereas mixed bed water quality deteriorates as ...
Sep 12, 2014
EDI Technical PerformanceThe operating results of EDI components depend on a variety of operating conditions. The following are the minimum conditions to ensure normal EDI operation. To achieve better...
Sep 12, 2014
I. Performance of EDI DeviceIngredientsscopeWater quality>16 MΩ-cm (25℃)Recovery rate90-95%Power consumption0.12-1.06 kWh/m³water temperature5-38℃Inlet water pressure0.31-0.68MPaInlet and outle...
Sep 12, 2014
Activated carbon is currently widely used in environmental protection, industry, and civil applications, achieving considerable success. However, after activated carbon reaches adsorption saturation a...
