Reasons for Unstable Voltage in Ultrapure Water Equipment

Some users of ultrapure water equipment have found that the current and voltage readings fluctuate constantly during operation, making it difficult to discern the true current and voltage values. What could be causing these fluctuations?

The causes could include problems with the ammeter and voltmeter, severe structural damage to the EDI (Electronic Demand Identifier) system, a problem with the EDI power supply, or the presence of air or impurities in the supply water.

Users should first check these points. If the ammeter and voltmeter are functioning correctly, and the EDI power supply has passed testing, then the problem likely lies with air or impurities in the supply water or severe scaling within the EDI system. Improving the pretreatment quality of the raw water and the sealing of the pure water tank may resolve the issue. If the problem persists, then the problem likely lies within the EDI system itself. It's possible the manufacturer has not cleaned the EDI module regularly; timely cleaning of the EDI module should resolve this issue.

The above is a summary compiled by the Marketing Department of Sichuan Youpu Ultrapure Water Technology Co., Ltd. regarding the reasons for continuous fluctuations in current and voltage in ultrapure water equipment systems. There are actually many reasons for this problem, and users need to regularly check the above-mentioned items to prevent similar issues from recurring. Many problems with ultrapure water equipment are caused by insufficient attention and improper use by users.

For more information on ultrapure water equipment, please visit the official website of Sichuan Youpu Ultrapure Water Technology Co., Ltd. (www.ccdup.com) or call the national customer service hotline: 400-884-6567